Fuzeblocks has designed a fuse block that is easy to install and fits into a small space. The on-board relay offers the choice for any device to be switched on or off automatically with the vehicle or to be powered constantly.
With the FZ-1 in place you can power all kinds of motorcycle accessories including, but not limited to; auxiliary lighting, GPS, radar detector, CB/FRS/GMRS radio, heated grips, XM radio, audio mixers, intercom system and any other device requiring 10A or less. Any of these accessories can have constant or switched power by simply placing the fuse in the correct position for the power desired.
Installation for the FZ-1 fuse block requires no crimping. All connections are made by heavy duty screw terminals that can accept up to a 12 gauge wire. All the FZ-1 needs is +12VDC, ground and a +12VDC switched source to make it fully functional. The unique board layout provides six individually fused circuits that can supply constant or switched power for each accessory depending on your needs. Check out all the features the FZ-1 has to offer and you'll agree that it makes powering your accessories easy.
Normally, to have switched and constant power for your accessories, two fuse blocks are required. One is wired directly to the battery for constant power and the second fuse block is wired through a relay for switched power. The FZ-1 eliminates the need to wire two fuse blocks by providing both types of power in one unit. It reduces the wiring by more than half and allows you to select what type of power you want for each output. The FZ-1 is easy to install, reduces the amount of wiring time required and is about the size of a pack of cigarettes. The unit is great for experts who want a simple installation and for novices who are electrically challenged.
-Easy to install
-6 Fuzed circuits
-Spare Fuze holders
-Mini (ATM) Fuzes
L 3.25" x W 2.5" x H 1.25"
Optional FZ Wiring Kit (pictured lower left, choose to add below)
Partially assembled for super easy installation. No crimping required and a Posi-Tap is included to make tapping your switched wire input a breeze with no damage to your wiring. To install the harness simply cut the wires to the desired length, add the cable harness webbing and zip tie the harness into place. We've made it very easy to install in a complete solution with the least amount of effort.
Wiring Kit Contents:
-6' 12GA Red w/Ring Terminal & 30A ATM inline fuse
-6' 12GA Black w/Ring Terminal
-6' 18GA Yellow w/3A ATM inline fuse
-6' Wire Harness Webbing
-1 Posi-Tap, EX-150B
Fuzeblocks FZ-1 Fuse Panel with Optional Wiring Kit
Produced by Fuzeblocks of USA