We are a Gerbing test ride center! Come by and take a heated jacket liner for a spin, feel the Microwire difference!
-Heating pads on the chest, back, collar, and sleeves
-Compressible, water-repellent, durable, Thinsulate® insulation
-Teflon® coated, wind-resistant, soft nylon shell
-Inside and outside pockets
-Silky soft micro denier collar
-Form-fitting patterns and sizing to fit snugly and easily under your outer garments
-Glove plug pockets placed on the sleeves secure the plugs when not in use
-Power Distribution Unit eliminates dangling cords
-Dual 2 wiring configuration (for one user only)
-Lifetime warranty on heating elements, 1 year warranty on materials and workmanship
-Incorporates Gerbing's Microwire® heating technology that uses micro-sized heating fibers to surround the body with warmth.
-Includes fused battery harness.
Heat - Microwire® Heat Technology
Source - 12-volts DC
Current - 6.4 amps
Watts - 77 watts
Surface Temp - 135°F +/- 5°F at 32°F
Please see the Gerbing Size Chart for your size.
Note: This includes a battery harness, but is too hot to plug in and wear at full temperature, so we recommend adding a Gerbing Lighted Switch at the minimum. The best solution is a Gerbing Temp Controller, which allows you to regulate the heat infinitely. Also, if you plan to add heated gloves or pant liner with either a switch or single temp controller, the Gerbing Splitter Cord is required. With this setup, the jacket/vest and gloves/pant liner will always be at the same heat setting. The best solution here is a dual temp controller which allows you to control the two pieces separately, and won't require the splitter cord. As always, please write or call email@example.com or 775-355-0655 with any questions.
Gerbing Heated Jacket Liner
Produced by Gerbing of USA