3 in 1 Feature:
Sequential Turn Signal
Right and Left LED arrays indicate sequential turn signals. These super-bright LEDs (8500 mCd) have a wide viewing angle of 180 degrees. They are sunlight readable, even from the adjacent lanes.
Brake Light Modulator
A cluster (6) LEDs is magnified by an acrylic lens to broadcast the Deceleration Warning sequence. As soon as you tap the brakes, they modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.
This is a programable feature. For additional visibility, all LEDs stay ON at reduced intensity, but you can also turn this feature Off.
All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection.
Chrome License Plate Holder
The frame is die cast alloy for strength and duarbility. High gloss chrome finish is polished to perfection.
A sturdy backing plate and mounting hardware, also in chrome, are included. Designed to accept the most commonly used 7-1/2" license plates.
Draws very little current (1/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires taping in to turn signal and brake wires. All neccessary connectors are supplied.
vectraLIGHT LPC-16 can be mounted with the LED arrays on top or bottom of the license plate.
Kisan VectraLight License Plate Frame
Produced by Kisan Tech of USA