100% waterproof accessory / fender pack!
100% waterproof Enduro or Supermoto fenderpack (bolt-on), which also fits to Hydro-3, R15, R20, R25, R30 or R35 increasing capacity by 5 liters.
2 x US-5 can be bolted to the rear fender/side panels to provide 10-litres of storage without compromising the overall seat-height. Extremely effective solution for carrying heavy tools on the trail (even better when used with a Kriega tool-roll, see link below). Packs can be put on either way(zip or mesh pocket) and are easily removed via the 2 x compression straps. NB - always feed the compression straps back through the ladderloc buckle to 'lock' the strap against any web-creep on the trail.
-300(H) x 160(W) x 100(D) mm
-100% waterroof (main body)
-Side access zip pocket (water-resistant)
-Reversible - zip or mesh pocket
-HYPALON - fitting straps included
-1000D Dupont Cordura
-RHINOTEK: abrasion resistant fabric
-HYPALON: abrasion resistant re-enforcement
-DRYPACK: taped-seam liner
-420D ripstop nylon - lightweight yet extremely strong
-Acetal ITW ladderloc buckles
-YKK water-resistant zip
The US-5 is reversible. The pack is branded both sides to allow either side to be the front of the pack (zip or coated mesh pocket).
Fitting(Backpack): Thread the 2 x fitting straps through the web-loops or square rings(depending on rucksack model). Thread ladderloc buckle and tighten US-5 down on to the pack.
Fitting(Bike/fender): Bolt the 2 x fitting straps to the fender (2 x M4 bolts per strap). Feed strap through web-loop on US-5 and tighten pack down on to the bike. NB - Always good practice to feed the web back through the buckle tp lock the strap against web-creep whilst out on the trail.
Kriega US-5 Drypack
Produced by Kriega of UK